The “Scut” seal is meant for sealing of measuring equipment, distribution cabinets, metering devices, premises and many other items, for provision of sealing safety of which the pulling of seal cable is needed.






Advantages:
-
Resistant to change of climatic conditions, withstands extreme temperature range -50ºC to +50ºC;
-
Easy to apply without sealing device;
-
Transparent outer case is made of PET, thus making the seal environmentally safe;
-
Rotating insert is made of polystyrene; 5 different colors are used in its standard variant;
-
Flexible galvanized cable is 0.6 – 0.7 mm in diameter;
-
Marking of a seven-digit number ensures effective protection against repeated numeration;
-
Inside mechanism rotates in one direction only thus ensuring impossibility of cable withdrawal after application of the seal;
-
Name of the manufacturing company – Olimp – is marked on the seal case.
Marking:
-
Standard variant allows marking of seven letters and a seven-digit number. Symbols are up to 2.5 mm high and can be made in three colors (black, white and red).
-
Under special order, 11 letters up to 2 mm high can be marked.
Cable:
-
Cable is made of galvanized steel and is up to 0.7 mm in diameter.
-
In standard variant length of the cable makes up 250 mm.
-
Under special order, cable may be made longer.
Packing:
-
Seals are packed in plastic sacks, 100 pcs. in each., and after that in cardboard baskets, 1,000 seals in each. Weight of one basket at the standard cable length makes up 3.530 kg.
Application procedure:
-
Insert loose end of the cable in the hole subject to sealing.
-
Move loose end of the seal through the hole in the case of the seal.
-
The cable is manually drawn tight in the seal, until the loop between the seal and device shrinks to 4-5 mm
-
To lock the seal rotate the colored insert in the seal case clockwise not less than 3 times.
-
After this the projected part of the colored inset breaks off, and the seal is considered to be mounted.
